Chapter 2 Introduction of the DI-2004 router
2.1 Exterior Specification of the DI-2004 Router
2.1.1
Appearance of the router
1. The indicator distribution and specification of the front panel
2. The specification of the rear panel
Figuer 2-2 Interface Distribution on Rear Panel of the DI-DI-2004
Switches and interfaces on the rear panel of the DI-2004 are shown in Figuer 2-2. The
specific meanings are in the followingTable 2-1.
Table 2-1 Component Functions on Rear Panel of the DI-DI-2004
Number
1
2
3
4
5
Figuer 2-1 Front Panel of the DI-2004
Symbol
Name
Power Switch
AC plug
Power
Indicator
Data
Link
TP
Ethernet TP port
Console
Console Port
DI-2000 Series Routers hardware installation manual
Push-up is on, and push-down is off
From the top down, they are the power indicator, the
Ethernet data transfer indicator and the Ethernet
twisted-pair(TP) link interface indicator.
Connect LAN(Ethernet) through the port with TP
Connect to terminals through the port to monitor and
deploy routers; the used line is the special Console
cable, and you can see connection specification in
Charter 2.3 "Port Connection Specification".
Comment
- 7 -