Using The Optional Sp01 "Spider" Shock-Mount - Samson CL8 Ower's Manual

1/ Insert the internal shock-mount
washer into the SP01 with the curved
side up. (Figure 1)
2/ Place the microphone carefully into
the SP01 and position the microphone
straight into the threaded collar. Figure 2
CL8_ownman.indd 7
Using the Optional SP01 Shock-Mount
Internal Shock-
mount Washer
SP01
Figure 1
CL7 or CL8
3/ Tighten the SP01 threaded collar
nearly all the way, then position the
microphone and tighten the collar all
the way.
NOTE: Be careful not to cross thread the
microphone into the SP01.
7
Figure 2
10/12/04 8:26:17 PM