Getting Started
SOURCE/
/
ESC
MUTE
Rotary encoder
Accessory List
• Head unit ............................................................................1
• Power cable ........................................................................1
• Mounting sleeve.................................................................1
• Bracket key.........................................................................2
• Face plate ...........................................................................1
• Screw (M5 × 8)....................................................................4
• Owner's Manual .......................................................... 1 set
Turning Power On and Off
Press SOURCE/
to turn on the unit.
• The unit can be turned on by pressing any other button except
CD.
Press and hold SOURCE/
turn off the unit.
• The first time power is turned on, the volume will start from level 12.
6
-EN
/CD
/ENT
SETUP
for at least 2 seconds to
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET with a ballpoint pen or similar pointed
object.
RESET switch
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.
/