Toshiba Portege M750 User Manual page 85

11. Screw in the two screws and replace the memory module cover.
Screws
12. Insert the tabs on the front of the keyboard into the corresponding
notches on the computer and place the keyboard down.
When seating the keyboard, be sure to connect the circuit board if the
keyboard ribbon cable was pulled out while you were removing the
keyboard.
13. Replace the keyboard and secure it using the two screws.
Be sure to use all two screws removed in step 7. Make sure no screw was
dropped into the computer. Make sure no foreign matter can be found
inside the computer.
Tabs
14. Set the keyboard brace into its groove and hold down to secure the
latches.
User's Manual
Figure 3-12 Seating the memory module cover
Figure 3-13 Replace the keyboard
Hardware, Utilities and Options
Memory module
cover
Keyboard
Screws
3-30