Store the DVD Super Multi (Double Layer) Drive Kit II unit in the Ultra Slim
Bay Case when removing it from the computer or transporting it.
Refer to
Removing a unit
To remove the DVD Super Multi (Double Layer) Drive Kit II unit from the
Ultra Slim Bay Case, follow the steps as described below:
1. Slide the Ultra Slim Bay latch to the unlock position.
2. Grasp the DVD Super Multi (Double Layer) Drive Kit II unit and slide it
out.
DVD Super Multi (Double Layer)
Drive Kit II unit
Figure 4-21 Removing the DVD Super Multi (Double Layer) Drive Kit II unit
Inserting a unit
To insert the DVD Super Multi (Double Layer) Drive Kit II unit into the Ultra
Slim Bay Case, follow the steps as described below:
■
DVD Super Multi (Double Layer)
Drive Kit II unit
User's Manual
Ultra Slim Bay Case
Insert the DVD Super Multi (Double Layer) Drive Kit II unit in the
Ultra Slim Bay Case as shown below and press until the Ultra Slim
Bay latch clicks.
Figure 4-22 Inserting the DVD Super Multi (Double Layer) Drive Kit II unit
section in this chapter.
Operating Basics
Ultra Slim Bay
latch
4-32