Toshiba Portege M750 User Manual page 136

Optical disc drive
Inserting a Ultra Slim Bay HDD Adapor II module
To insert the Ultra Slim Bay HDD Adaptor II, follow the steps as described
below:
1. Insert the Ultra Slim Bay HDD Adaptor II in the computer as shown
below and press until the Ultra Slim Bay latch clicks.
2. Remove the Ultra Slim Bay lock screw from the Unlock position.
3. If you want to lock the Ultra Slim Bay HDD Adaptor II, set the Ultra Slim
Bay lock screw in the hole for the lock position.
Ultra Slim Bay
HDD Adaptor II
Ultra Slim Bay Case
The DVD Super Multi (Double Layer) Drive Kit II is equipped with an Ultra
Slim Bay Case. This section explains how to remove and install the DVD
Super Multi (Double Layer) Drive Kit II unit.
User's Manual
Lock screw
(Unlock position)
Hook
Figure 4-19 Removing the optical disc drive
Unlock position
Figure 4-20 Inserting the Ultra Slim Bay HDD Adaptor II
Operating Basics
Lock position
Ultra Slim Bay
latch
Lock screw
(Lock position)
4-31