Arming The System To Home; Arming The System To Night; Force Arming The System - Apex Digital DESTINY 6100 SERIES Owner's Manual

Arming The System To HOME:

Push the H key on a system keypad,
or
Press the # key during local or remote phone access,
or
Press the appropriate button on a wireless keyfob.
If no zones are open, the red HOME LED will light and you will hear
the system say "ARMED TO HOME" over the phone or through the
speaker.
The security system is now on, or armed. When armed to the HOME
mode, only the exterior, or perimeter, zones are armed. This will
allow you to move about freely within your home. If any zone is open
while attempting to arm the system, the HOME LED will not light
and you will hear the system say "ZONES OPEN" over the phone or
through the speaker, which indicates that the system did NOT arm.
(See FORCE ARMING to continue)
Arming The System To NIGHT (optional):
Push the H key twice on a system keypad,
or
Press the # key twice during local or remote phone access.
The green AWAY LED will light with the red HOME LED and the
system will say "ARMED TO NIGHT" over the phone or through the
speaker. When armed to the NIGHT mode, the perimeter entry delay
zones become instant (no entry or exit delay) and your installer may
program some interior zones to be active. If you wish to return to the
HOME mode, simply push the # or H key any time the system is in
the NIGHT mode.

Force Arming The System:

If you attempt to arm the system to either HOME or AWAY but you
hear "ZONES OPEN" over the phone or through the speaker and
notice that neither the HOME LED nor the AWAY LED has come on,
the system is NOT armed. However, the system can be FORCED
ARMED.
Arming the System
9
(cont'd)