Local Phone Access; Using Your Phone As Keypad - Apex Digital DESTINY 6100 SERIES Owner's Manual

Phone System Access

Local Phone Access

What can you do from your phone?

Using Your Phone As Keypad

The system is programmed to allow you the use of your home
telephones as keypads. You will notice that the keypad duplicates the
keys of your phone. The * replaces the A key and the # replaces the H
key. Throughout this manual we will refer to both types of keys. Your
installer will let you know which key or keys allow you to access the
system from the phones. The local phone access code must be entered
within 5 seconds of picking up the telephone. If the correct code is
entered within 5 seconds, you will hear the system acknowledgement
tone or system status. At this point you can control the system just
like you would any hardwired keypad. Have the installer demonstrate
this feature so you become familiar with the different characteristics
of your system.
EXAMPLE
Assuming the local phone access code is *, #: (Default)
1. Pick up phone and press the * key and then the # key.
2. Panel will respond with an acknowledgement tone.
Now you are into the keypad mode. Also see: KEYPAD AND PHONE
DIGIT QUICK REFERENCE
Arm/Disarm system
Check Status
2 Way/Listen in Mode
Lights and Appliance Control
Panic (From Local Phone Only)
Change User Codes
14