Changing The Clock Time; Backlight Intensity; Rklcd / 6160Ap Keypad Display - Apex Digital DESTINY 6100 SERIES Owner's Manual

Changing The Clock Time

To set or change the system time, press the 2 & 8 keys simultaneously
from a hardwired keypad. The system will respond by speaking "enter
four-digit time." Simply enter the time in a 12-hour format. After the
time is entered, the system will say "enter 1 for AM, 2 for PM." After
selecting AM or PM, the system will confirm the entered time. If an
invalid entry is made, the system will speak "error" and wait for a
valid entry. It will then prompt you to enter the day: 1 SUNDAY, 2
MONDAY, simply enter the appropriate number for the corresponding
day. It will then ask you to enter the two-digit month, followed by
two-digit date, and the two-digit year. After entering the values the
system will speak the month day and year, followed by "exit".

Backlight Intensity

You can control the brightness level of the key backlighting. The
simultaneous depression of the 4 and 7 keys will step the backlighting
through seven different levels of brightness.
simultaneously a number of times until the backlighting is totally off.
We define all backlighting off as level 1. Levels 2 through 6 will take
the key backlighting through 5 progressively brighter levels. One step
beyond the brightest level will take the backlighting to half intensity.

RKLCD / 6160AP Keypad Display

The RKLCD keypad has a 2-line LCD display.
system arming status as well as any other existing zone or panel
conditions. The following abbreviations are used in the LCD display:
AL – Alert – The associated device has caused an alarm
TR – Trouble/Tamper – Most likely a wireless transmitter cover has
been removed
BP – Bypass – The associated device is temporarily out of the system
LB – Low Battery – A wireless transmitter's battery needs
replacement
The rate at which the LCD display cycles through its reports is
adjustable. Pressing the 5 and 8 keys simultaneously will advance to
the next one of four speed levels.
About the Keypads
7
(cont'd)
Press 4 and 7
This will display