Night; Monitor - Apex Digital DESTINY 6100 SERIES Owner's Manual

About the Keypads
(cont'd)

Night

While there is not a dedicated "NIGHT" LED, when the system is
armed in the NIGHT mode, both the HOME and AWAY LED's will be
on simultaneously. Press H any time the system is already armed to
HOME to change to NIGHT. Pressing H when system is armed to
NIGHT will change the arming back to HOME. For example: You are
at home and do not plan on leaving the house anytime soon so you
arm the system to the HOME mode. Several hours later you go to bed
and simply press the H button again arming your system to the
NIGHT mode for greater protection while you are sleeping. When you
wake up in the morning simply press the H button again and you are
able to walk around your house without fear of setting the alarm off.
Note: Some model keypads may have a single "ARMED" LED, which
is illuminated if the system is armed in any mode (AWAY, HOME, or
NIGHT).
RK-36 LED / RKLCD / 6160AP Keypads – Special Keys
Status
Pressing this key will cause the system to immediately speak the
system status. This will include the arming status, any zones showing
open, alert, or trouble, and any other available panel information.

Monitor

Pressing this key toggles the system between three possible monitor
conditions.
MONITOR ON – System will announce doors and windows when
opened
MONITOR OFF – System will not announce doors and windows when
opened
MONITOR TONE – System will beep instead of speak when doors and
windows are opened. Commonly called "chime".
5