Panic From Your Local Phone; Remote Phone Access - Apex Digital DESTINY 6100 SERIES Owner's Manual

Notes:
If your regular phone line is out for any reason you will not hear a
dial tone when you pick up a phone, however, you will hear a
series of tones indicating the line is gone. If this is the case, there
is no need to access the system because the phone will already be a
system keypad when it is picked up. Press any key and the tones
will stop. Now you may use the phone as a keypad. If your system
reports to a central monitoring station, and there is an activation,
you can pick up a phone while the panel is communicating and
simply enter your disarm code.
phone as a keypad as soon as you pick it up.
When you access the system from your home phone, your normal
incoming phone line is disconnected. In case of an incoming call
you will hear one-second tones similar to call waiting. To answer
the call, simply hang up to terminate telephone keypad access.

Panic From Your Local Phone

Your installer can program the panel to allow a panic activation from
any local phone.
system from an on-site phone, pressing the 0 key five times in a row
will initiate a PANIC alarm.
Note: Never program a disarm code with all zeroes.

Remote Phone Access

You can gain access to the system from any touch-tone phone when
you are away from home. If you use an answering machine, your
installer will program an override digit, which you will use to bypass
the answering machine and get directly into the system. (Default is
#). Note: The override digit will not allow you to bypass an off-site
answering service. If you have a phone company answering service
(no answering machine on site), your installer may enable an optional
override-callback feature, which will allow you to bypass the voice
mail and access the panel.
Phone System Access
The system will recognize the
Once enabled, anytime you have accessed your
15
(cont'd)