GE ZDP484NG Installation Instructions Manual page 17

Installation
ACCESSORIES--TOEKICK (provided)
• Install the toekick after the range has been leveled.
• Measure the distance between the floor
and the bottom of range.
• Loosen the two screws on each end. Adjust
the toekick height bg sliding the upper and lower
pieces apart to 1/8" less than the measured height.
oSecure the top and bottom sections bg tightening
the 2 screws on each end.
o Push toekick against range leg until clip snaps
to legs.
NOTE: Be sure the toekick snaps securelg to the leg.
Topof
Toekick
Bottom
of Toekick
Screw
Push
Push
17