Installing The Range - GE JSP46 Installation Instructions Manual

Installation Instructions
Installing the Range
SLIDE RANGE INTO OPENING
Position the range in front of the
cabinet opening.
Make sure that the glass which
overhangs the countertop clears the
countertop. Raise the unit by lowering
the leveling legs if necessary.
%
%
Push while lifting the range into the
opening until the range is within 2" of
engaging the anti-tip bracket
Remove the protective trim from the
side of glass. (If provided)
_] Using the adjustable pliers or wrench carefully screw in the back leveling leg
until the glass overhang comes to rest
on the counter top.
JU o'a
%
Carefully push the range into the
opening until the counter top fully
engages the control panel. The back
glass overhang should cover the cutout
opening.
ountertop
Make sure the edge
of the countertop fits flush
againstthe end of the
Front Control Panel
F_ Plug range cord into receptacle. Locate the cord in the back of the range in a
manner that will not touch or be moved
by the drawer.
POSITION RANGE CORD
SOTHATTHERE I S NO
INTERFERENCE WITH
\
\
f
\ /
/
\
\
[_ hen carefully screw in the front two
leveling legs (similar to E5) until the
glass overhang touches the
countertop.
9 Continued on following page