Table of Contents
Advertisement
Available languages
Available languages
Installation
Instructions
[STEP 5] SLIDE UNIT INTO ENCLOSURE
Roll the unit into the enclosure, being c(]reful not to pinch
the w(]ter line or power cord.
i
, A long flat bar or y(]rd stick may be needed to guide the
front edge of the anti-tip bracket over the unit.
, If space allows, you may also bend the front edge of the
bracket upw(]rd slightly, (]llowing it to cle(]r the b(]ck of
the unit.
i i ..........
.J
J
. Remove Top-Center trim cover from unit.
Secure the unit to the Anti-tip br(]cket using both
machine screws & w(]shers to engage the threaded
inserts in the (]nti-tip bracket.
Hand start the screws until unit is in desired Ioc(]tion
within the install space.
Finalize unit install by tighening the screws fully.
Reinst(]ll Trim cover.
STEP 6 ] REMOVETOEKICKAND VENT
The toekick must be removed to access
the leveling leg system.
Remove b(]nd (]round EPSblock in front of toekick.
Remove (]nd dispose of EPSblock.
Removethe solid portion of the toekick by pulling forw(]rd.
Pl(]cethe toekick, vent (]nd screws out of the w(]y so you
will h(]ve them for reinst(]ll(]tion.
Vent
/
Screws
L
(behind
I._ ....
t0el<icl<)--_
Screw/Y
_,_
Vent
Q_
Screw
_]
-_"T0el<ick
15
Advertisement
Table of Contents
