Step 1, Remove Packaging - GE ZIK30GNZBII Installation Instructions Manual

Installation Instructions
[STEP 1] REMOVE PACKAGING
A CAUTION: THE REFRISERATOR iS
TOP-HEAVY. BE CAREFUL WHEN MOVING.
Cut bands and tape on the top and bottom
of packaging with o utility knife.
Unfold the cardboard seams and remove the top
of the packaging.
Slide the remainder of the box off of the appliance.
You can use a box cutter to cut the remaining
cardboard being VERYCAREFULnot to scratch
the appliance.
Remove the Styrofoam supports from around the unit.
DO NOT remove door bend or lower EPSbanded
pert until unit is reedy to go into enclosure.
Cut EPSskid at the sides near the front from the back
of the unit.
Push unit forward & remove rear portion of the EPS
skid.
Carefully lower rear onto the floor.
Lean unit back slightly & remove front portion of the
EPSskid.
Discard all unused packaging materials appropriately.
The unit can now be moved using an appliance hand
truck or rolled on a properly protected floor by 2
people.
Leave any protective film on the refrigerator until
installation is complete.
13