Table of Contents
Advertisement
Available languages
Available languages
Safety information
BEFORE YOU BEGIN
Read these instructions
completely and carefully.
.
IMPORTANT-
Savetheseinstructions
for local inspector's use. Observe all governing codes
and ordinances.
. Note to Installer
- Be sure to leave these
instructions with the Consumer.
. Note to Consumer
- Keep these instructions
with your Owner's Manual for future reference.
,Skill
Level - Installation of this refrigerator requires
basic mechanical, carpentry and plumbing skills. Proper
installation is the responsibility of the installer. Product
failure due to improper installation is not covered under
the GE Appliance Warranty. See the Owner's Manual for
warranty information.
For Monogram local service in your area, call
1.800.444.1845.
For Monogram Parts and Accessories, call
1.800.626.2002.
www.monogram.com
A WARNING:
This appliance m ust be properly g rounded.
See "Grounding theRefrigerator,"
page 5.
If you received a damaged refrigerator, you should
immediately contact your dealer or builder.
A CAUTION:
Due totheweightand size ofthis refrigerator,
and to
reducetherisk o fpersonal injury or damage tothe
product-TWO PEOPLE ARE REQUIRED FOR PROPER
INSTALLATION.
A WARNING:
. These refrigerators
aretop-heavy and must
be securedto prevent thepossibility
oftipping
forward. A nti-tip
protection isrequired.
See page 14
for details.
. Use this appliance only for its intended purpose.
. Immediately repair or replace electric service cords
that become frayed or damaged.
. Turn off the circuit breaker to disconnect power
before cleaning or making repairs.
. Repairs should be made by a qualified service
technician.
WARN ING-R6OOa
Refrigerant
Warning: This appliance contains isobutane refrigerant,
R6OOa, a natural gas with highenvironmental
compatibility. However it is also combustible. Please
adhere to the warnings below:
1) When handling, installing and operating the appliance,
care should be taken to avoid
damage to the refrigerant tubing.
2) Servicing shall be performed by factory-authorized service
personnel and component parts shall be replaced with
manufacturer-authorized replacement components.
21) R efrigeration products contain refrigerants, which
under federal law must be removed prior
to product disposal.
41Keep ventilation openings in the appliance enclosures or
in the built-in structure clear of obstruction.
51Do not use mechanical devices or other means
to accelerate the defrosting process.
61Do not damage refrigerant circuit.
7) Do not use electrical appliances inside the
food storage compartment of the appliance.
CONTENTS
Cabinet Enclosure Dimensions ............ 3
Refrigerator Dimensions ..........................
4
The Installation Space ..............................
5
Grounding the Refrigerator ....................
5
Dimensions and Clearances .................. 3
Integrated Handles
115° Door Swing ........................................
6
Integrated Handles
90 ° Door Swing ............................................
7
Professional Handles
1!5 ° Door Swing ........................................
8
Professional Handles
90 ° Door Swing ............................................
9
SS Panel Accessory & Dimension .... 1 0
3/8" Custom Panel Dimensions ........ 11
Tools, Hardware, Materials .................. 12
Step 1, Remove Packaging .................. 13
Step 2, Install Anti-tip Bracket ............ 1/4
Step 3, Thread Water Line .................. 1/4
Step 4, Connect Power ..........................
1/4
Step 5, Remove Toekick and Vent....15
Step 6, Slide Unit into Enclosure ...... 1 5
Step 7, Connect Water Line ................ 15
Step 8, Level Refrigerator ....................
16
Step 9, Install Toekick and Vent ........ 1 6
Step !0, Reverse Door Swing...... 1 7, 18
Step !!, Adjust Door Swing ................ 18
Step 12, Attach Hinge Guard .............. 18
Panels..........................................
19
Step 14, Start Icemaker ........................
20
Badge Templates ....................................
21
Advertisement
Table of Contents
