Using Wps Function Via Web-Based Interface; Using Wps Function Without Web-Based Interface - D-Link DIR-300NRU User Manual

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual

Using WPS Function via Web-based Interface

To add a wireless device via the PIN method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Change button.
3. Select the PIN value from the WPS Method drop-down list.
4. Select the PIN method in the software of the wireless device that you want to connect to the
router's WLAN.
5. Click the relevant button in the software or on the cover of the wireless device that you want
to connect to the WLAN.
6. Right after that, enter the PIN code specified on the cover of the wireless device or in its
software in the PIN Code field.
7. Click the Connect button in the web-based interface of the router.
To add a wireless device via the PBC method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Change button.
3. Select the PBC value from the WPS Method drop-down list.
4. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
5. Click the relevant button in the software or on the cover of the wireless device that you want
to connect to the WLAN.
6. Click the Connect button in the web-based interface of the router.

Using WPS Function without Web-based Interface

You can add a wireless device to the router's WLAN without accessing the web-based interface of
the router. To do this, you need to configure the following router's settings:
1. Configure a type of WPA encryption for the WLAN (or the first part of the WLAN).
2. Select the WPS Enable checkbox.
3. Click the Change button.
4. Save the settings and close the web-based interface (click the Save line in the top-page
menu displayed when the mouse pointer is over the System caption, then click the Logout
line).
Later you will be able to add wireless devices to the WLAN by clicking the hardware WPS button
located on the right side panel of the router.
Page 56 of 93
Configuring via Web-based Interface