D-Link DIR-300NRU User Manual page 28

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
Parameter
Name
Connection Type
Enable
Direction
Physical interface
IP Address
Netmask
Interface
When all needed settings are configured, click the Save button.
On the DHCP server tab, you can configure the built-in DHCP sever of the router.
General settings
A name for this connection.
The type of network protocol used by this connection – IPoE.
The checkbox enabling this connection.
The direction of this connection.
Physical layer
The physical interface to which this connection is assigned.
IP settings
The router's IP address. By default, the following value is specified:
192.168.0.1.
The subnet mask. By default, the following value is specified:
255.255.255.0.
The name assigned to the connection by the system.
Figure 19. The tab for configuring the DHCP server.
Page 28 of 93
Configuring via Web-based Interface
Description