Using Wps Function Via Web-Based Interface - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
To activate the WPS function, select the WPS Enable checkbox and click the Change button.
When the checkbox is selected, the Information and Connection sections are available on the
page.
Parameter
WPS Status
SSID
Network Authentication The network authentication type specified for the WLAN.
Encryption
Device PIN
Client PIN
WPS Method
PIN Code
Connect

Using WPS Function via Web-based Interface

To add a wireless device via the PIN method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Change button.
3. Select the PIN value from the WPS Method drop-down list.
4. Select the PIN method in the software of the wireless device that you want to connect to the
router's WLAN.
5. Click the relevant button in the software or on the cover of the wireless device that you want
to connect to the WLAN.
6. Right after that, enter the PIN code specified on the cover of the wireless device or in its
software in the PIN Code field.
7. Click the Connect button in the web-based interface of the router.
The state of connecting the wireless device via the WPS function.
The name of the router's WLAN.
The encryption type specified for the WLAN.
The PIN code of the router.
The PIN code of the device newly connected to the router via the
WPS function.
A method of the WPS function. Select a value from the drop-down
list.
PIN: Connecting the device via the PIN code.
PBC: Connecting the device via the push button (actual or virtual).
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page 56 of 110
Configuring via Web-based Interface
Description