D-Link DIR-300NRU User Manual page 78

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
You can specify the following parameters:
Parameter
Name
Protocol
Action
IP address range
Source
Destination
Figure 55. The page for adding a rule for IP filtering.
IP-filter rule editing
A name for the rule for easier identification.
A protocol for network packet transmission. Select a value from the
drop-down list.
Select an action for the rule.
ACCEPT: Allows packet transmission in accordance with the criteria
specified by the rule.
DROP: Denies packet transmission in accordance with the criteria
specified by the rule.
IP Addresses
Select the checkbox if you want to specify a range of IP addresses as
the source or destination IP address.
The source host/subnet IP address. To specify an IP address add /32.
The destination host/subnet IP address. To specify an IP address add
/32.
Page 78 of 93
Configuring via Web-based Interface
Description