D-Link DIR-300NRU User Manual page 30

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
On the Static DHCP tab, you can specify MAC address and IP address pairs. The tab is active
when the router's DHCP server is enabled.
To create a MAC-IP pair (set a fixed IP address in the local area network for a device with a certain
MAC address), click the Add button.
You can specify the following parameters:
Parameter
IP address
MAC address
Host name
Click the Save button.
Existing MAC-IP pairs are displayed on the Static DHCP tab. To remove a pair, select the
relevant line in the table and click the Remove button. Then click the Save button.
Figure 20. The tab for configuring MAC-IP pairs.
An IP address which will be assigned to the device with the
specified MAC address.
The MAC address of the device from the LAN.
A network name of the device for easier identification. Optional.
Page 30 of 93
Configuring via Web-based Interface
Description