Culligan HE Owner's Manual page 35

Set Year (2009–2030)
SET YEAR
>2012
Set Clock Type (12 or 24)
CLOCK TYPE
>12 HR
Set Hour (12PM–11AM)
SET HOUR
>12AM
Set Minutes (0–60)
SET MINUTES
>01
Unit Type (Softener, Filter, or Resin + Carbon)
UNIT TYPE
>SOFTENER
Valve Type (HE 1, HE 1.25, HE 1.5, HE 1 Twin, HE 1.5 Twin, 4-Cycle, 5-Cycle, or Plat Plus)
VALVE TYPE
>
Units (US or Metric)
UNITS
>US
The screen displays the year setting. Press
displayed (and view the next setup screen), or press
setting.
Press to see the next available value. Press
year and advance to the next setting, CLOCK TYPE.
The screen displays the clock type setting. Press
tion displayed (and view the next setup screen), or press
the setting.
Press to change the clock type from 12-hour to 24-hour. Press
to accept the selected clock type and advance to the next setting, SET
HOUR.
The screen displays the hour setting. Press
displayed (and view the next setup screen), or press
setting.
Press to change the hour (in this example, from 12PM to 10AM).
to accept the selected hour and advance to the next setting, SET
Press
MINUTES.
The screen displays the minutes setting. Press
tion displayed (and view the next setup screen), or press
the setting.
Press to change the minutes (in this example, from 0 to 20). Press
to accept the selected hour and advance to the next setting, UNIT TYPE.
The screen displays the unit type setting. Press
setting (softener) and advance to the next setting, VALVE TYPE.
The screen displays the valve type setting. Press
setting (HE 1) and advance to the next setting, UNITS.
The screen displays the units of measure setting. Press
default setting (US) and advance to the next setting, INSTALL TYPE.
to accept the information
to change the
to accept the selected
to accept the informa-
to change
to accept the information
to change the
to accept the informa-
to change
to accept the default
to accept the default
to accept the
01021076
31