Culligan HE Owner's Manual page 21

A
Figure 7. HE softener cover fastener clip.
Filter
Brine Elbow
Drain Elbow Flow Control
Figure 9.
Attaching the Cover
Once the drain and brine line is connected re-attach the cover. Refer to the below instructions and Figure
10 through Figure 12.
1. Insert the two pins on the top of the cover into the two holes on top of the frame; the cover
should be slightly angled. See Figure 10.
2. Rotate the cover downward inserting the two pins on the side of the cover into the two holes on
side of the frame. See Figure 11.
3. Attach the cover fastener onto the control valve. See Figure 12.
Figure 8.
Removing the drain elbow and brine elbow.
Removing the HE softener cover.
Clips
01021076
17