Culligan HE Owner's Manual page 2

High efficiency automatic water softener
Table of Contents

Advertisement

Attention
Culligan
Customer
01021076
ii
The installation, service and maintenance of this equipment should be rendered by a qualified and trained
service technician. Your local independently operated Culligan dealer employs trained service and main-
tenance personnel who are experienced in the installation, function and repair of Culligan equipment. This
publication is written specifically for these individuals and is intended for their use.
We encourage Culligan users to learn about Culligan products, but we believe that product knowledge is
best obtained by consulting with your Culligan dealer. Untrained individuals who use this manual assume
the risk of any resulting property damage or personal injury.
WARNING!
NOTE
This system is not intended for use where water is microbiologically unsafe or with
water of unknown quality.
WARNING!
WARNING!
This equipment complies with Part 15 of the FCC rules. Any changes or modifications not expressly ap-
proved by the manufacturer could void the user's authority to operate the equipment. Changes or modifi-
cations not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
CAUTION!
CAUTION!
CAUTION!
CAUTION!
Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates are
protected by patents issued or pending in the United States and other countries. Culligan reserves the right
to change the specifications referred to in this literature at any time, without prior notice. Culligan, Aqua-
Sensor, Tripl-Hull, and SoftMinder are trademarks of Culligan International Company or its affiliates.
Electrical shock hazard! Prior to servicing equipment, disconnect
power supply to prevent electrical shock.
If incorrectly installed, operated or maintained, this product can cause
severe injury. Those who install, operate, or maintain this product
should be trained in its proper use, warned of its dangers, and
should read the entire manual before attempting to install, operate,
or maintain this product.
This device complies with part 15 of the FCC rules subject to the
two following conditions: 1) This device may not cause harmful
interference, and 2) This device must accept all interference received
including interference that may cause undesired operation.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
This product is not to be used by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, unless they have been given supervision or instruction.
Children should be instructed not to play with this appliance.
If the power cord from the transformer to the unit looks or becomes
damaged, the cord and transformer should be replaced by a Culligan
Service Agent or similarly qualified
person in order to avoid a hazard.
Culligan International Company
9399 West Higgins Road, Suite 1100
Rosemont, Illinois 60018
1-847-430-2800
www.culligan.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

He series

Table of Contents