Table of Contents
Advertisement
Culligan
®
Automatic
Water Softeners
assisted living facilities
cafeterias
casinos
educational facilities
food service
grocery
hotel/ hospitality
institutions
laundry
corporate campuses
theme parks
vehicle wash
Hi-Flo
3 Automatic Water Softener
®
Culligan Hi-Flo
3 Water Softener Standard Features
®
• Corrosion Resistant Tanks–made from fiberglass-
reinforced polyester. Additional reinforcement from
continuous fiberglass overwrap. Underdrain design
maximizes softener's capacity, reduces pressure loss.
• Softening Media—High quality resin provides stability
and uniform size for top performance and long life.
• Choice of Cycle Controllers—Regeneration cycle may
be initiated by timeclock any or every day of the week.
Optional meter starts cycle after preset volume of
water has been softened.
• Positive Motor-Driven Regeneration Valve–Motor
driven piston is reliable under severe water conditions,
resists dirt, iron, turbidity.
• Automatic Brine Control—Automatically measures
the correct amount of brine. A single turn of dial sets
correct amount dosage and capacity.
• Dubl-Safe
Brine System—Positive overfill protection.
™
Automatic refill control is backed up by shutoff float
valve to minimize chance of overflow.
More
Advertisement
Table of Contents
Related Manuals for Culligan Automatic Water Softeners
Summary of Contents for Culligan Automatic Water Softeners
- Page 1 Hi-Flo Culligan Hi-Flo • Corrosion Resistant Tanks–made from fiberglass- reinforced polyester. Additional reinforcement from continuous fiberglass overwrap. Underdrain design maximizes softener’s capacity, reduces pressure loss. • Softening Media—High quality resin provides stability and uniform size for top performance and long life.
-
Page 2: System Specifications
ISO 9001 Printed in USA (2/01) Certification MOORE PART NO. 46956 Hey Culligan Man, Culligan Man, Culligan Commercial @ Work, www.culligan.com and Culligan Service Network are trademarks of Culligan International Company. 3 Automatic Water Softener • Restaurants—For dishwashing, cleaning material savings, scale reduction. - Page 3 24 x 72 30 x 48 284 410 x 1,830 760 x 1,200 30 x 72 30 x 48 426 760 x 1,830 760 x 1,200 Commercial Systems ©2000 Culligan 1-800-CULLIGAN www.culligan.com Printed in USA 4/00 DCO 992587 SL-0074 Moore Part No. 46944 Approx.
- Page 5 Hi-Flo 3 CAD File: Soft_HF3.dwg...
- Page 6 ¨ (Closed Bidding Arrangement) Qualified manufacturers of water softener equipment must be engaged in the manufacture of this equipment for a period of not less than fifteen (15) years. Acceptable manufacturers are Culligan International Company or the Engineer’s approved equal.
- Page 7 @ 25 PSI gallons nominal gallons per day (gpd) 40 –100 F 30–120 PSI 120 Volt, 60 Hz, 1 phase (receptacle required) ”L x ZERO GPG HARDNESS MG/L HARDNESS Culligan Hi-Flo 3 Softener Engineer’s Specification ® ”W x ”H More Page 2...
- Page 8 The meter package provided shall be functional within the flow range of 3 to 130 gpm and will be provided with a threaded tee meter fitting. Culligan Hi-Flo 3 Softener Engineer’s Specification ® More...
- Page 9 FIELD SERVICE The services of a factory authorized service representative can be made available to supervise, inspect and provide operator training as required for initial start-up and system operation. Contact your local Culligan dealer for service rates and scheduling. WARRANTY A single written warranty must be provided from the manufacturer of the water softener system covering workmanship and materials.