Jumper Settings - Intel i865PE User Manual

3-2 Jumper Settings

JCMOS:
Clear CMOS data Jumper
If the CMOS data becomes corrupted or you
forgot the supervisor or user password,
clear the CMOS data to reconfigure the
system back to the default values stored in
the ROM BIOS.
1
To CMOS Clear data, please follow the steps below.
1. Turn off the system.
2. Change the jumper from "1-2" to "2-3" position
for a few seconds.
3. Replace the jumper on to the "1-2" position.
4. Turn on the system and hold down the <Del>
key to enter BIOS setup.
Settings:
1-2: Normal (Default)
2-3: Clear CMOS
Installation
Page 3-5