Bios Security Jumper Settings - Intel NUC5i5MYBE Product Specification

Intel NUC Board NUC5i5MYBE Technical Product Specification
Table 32 lists the settings for the jumper.
Table 32. BIOS Security Jumper Settings
Function/Mode
Normal
Lockdown
Configuration
64
Jumper Setting Configuration
1-2 The BIOS uses current configuration information and passwords for
booting.
2-3 The BIOS uses current configuration information and passwords for
booting, except:
• All POST Hotkeys are suppressed (prompts are not displayed and keys
are not accepted. For example, F2 for Setup, F10 for the Boot Menu).
• Power Button Menu is not available (see Section 3.7.4 Power Button
Menu).
BIOS updates are not available except for automatic Recovery due to
flash corruption.
None BIOS Recovery Update process if a matching *.bio file is found. Recovery
Update can be cancelled by pressing the Esc key.
If the Recovery Update was cancelled or a matching *.bio file was not
found, a Config Menu will be displayed. The Config Menu consists of the
following (followed by the Power Button Menu selections):
[1] Suppress this menu until the BIOS Security Jumper is replaced.
[2] Clear BIOS User and Supervisor Passwords.
[3] Reset Intel® AMT to default factory settings.
[4] Clear Trusted Platform Module.
Warning: Data encrypted with the TPM will no longer be accessible
if the TPM is cleared.
[F2] Intel® Visual BIOS.
[F4] BIOS Recovery.
See Section 3.7.4 Power Button Menu.