View Switch/Jumper Settings; Exit; Scu Utilities - Intel R440LX Product Manual

View Switch/Jumper Settings

Use this step to view manufacturer's instructions about setting dip switches
and jumpers on add-in boards and about running utilities to ensure the
correct configuration of each adapter.
This step does not provide switch and jumper information about the
motherboard. See Chapter 4 of this manual for defaults and options.

Exit

This step exits to the operating system. If any configuration settings were
changed, you will be prompted to restart your system to see the changes.

SCU Utilities

At the bottom of the main SCU menu, there is an option to press <F9> to
display the Utilities menu. The menu lists options that control how a
configuration is produced. For most of these choices, select the option line
and press the spacebar to enable/disable the option.
For descriptions of the options, press <F1> for help while the Utilities menu
displays on the screen. Here is a little more information about some of the
utilities:
Advanced/Dealer Mode—some ISA boards can be shipped with
configuration files that contain options that are not ordinarily configured by
end users. If this mode is turned on, any functions marked as EXP (expert)
in the shipped configuration file will be visible and can be updated.
36
Step 5 - View Switch/Jumper Settings
After saving the configuration, it is important that
you do the following steps before using the system:
1. Note the switch and jumper settings and verify that
all switches and jumpers on the boards in
your system are set correctly. Some boards
have switches and jumpers that need to be set
manually.
2. Note the software statements to see if any of
the boards in your configuration need special
drivers to be loaded.
[OK = ENTER]
OM05091
Chapter 2 - Configuring the System