Device Connectors - Intel i865PE User Manual

3-5 Device Connectors

The I/O back panel for this mainboard is shown below. When installing the
mainboard into the computer case, use the bundled I/O shield to protect this back
panel.
PS/2
Mouse
PS/2
Keyboard
S/PDIF-out S/PDIF-out
Coaxial Jack Optical
(Optional)
JPWR_FAN
Parallel Port
COM1
Figure 12 - I/O Ports
JCPU_FAN
JCPU_FAN / JPWR_FAN / JSYS_FAN:
CPU/Power/Chassis Fan Power Connectors
JCPU_FAN: The CPU must be kept cool by using a
JPWR_FAN: If you are installing an additional fan
JSYS_FAN: The chassis fan will provide adequate
JSYS_FAN
JCPU_FAN
Ground Sense
+12V
The system is capable of monitoring the fan speed in
RPM (Revolutions Per Minute). Refer to the PC
Health Status submenu of the BIOS for the current
speed of the CPU fan , power fan and chassis fan.
RJ45
LAN
Mic-in/Center&Subwoofer (Pink)
USB2.0 x 4 ports
heatsink with fan assembly.
in the unit, connect to this fan
connector.
airflow throughout the chassis to
prevent overheating the CPU.
JPWR_FAN
Ground Sense
+12V
Installation
Line-in/Rear out (Light Blue)
Line-out/Front out (Lime)
JSYS_FAN
Sense
+12V
Ground
Page 3-11