Page 1
installationinstructions 9758159 ' Electric Quick Reference Freestanding Range Table of Contents: Pages Before you start Product dimensions Cabinet dimensions/requirements Electrical requirements []-I_ Installation steps If range does not operate If you need assistance'service Moving the range if you need assistance: Check ,/our Use and Care Guide for a toll-free number to call or call the dealer from whom...
Page 2
IMPORTANT: Some cabinet and building Before you start... Tools needed: materials are not designed to withstand heat produced by the oven baking. Check with your builder Your safety and the safety cabinet supplier to make sure that the Assemble the required tools and parts others...
Page 3
Product dimensions (68.6 47" (119.4 cm', max. 36" (91.4 cm) min. Cabinet dimensions/requirements Dimensions that are shown must be used. Given dimensions provide minimum clearance. Contact surface must be solid and level. SIDE Centerline VIEW of rant Maximum depth for cabinets Minimum height to 18"...
Page 4
Now start... Electrical requirements If codes permit and a separate ground Range must be connected to the proper wire is used, it is recommended that a electrical voltage and frequency specified qualified electrician determine that the on the model/serial rating plate. (The ground path and wire gauge are in model/serial rating plate is located on the...
Page 5
[] Level range by adjusting the (4) leveling legs with a wrench. NOTE: A minimum clearance of 1/8" (3.2 ram) is required between the bottom of the range and the leveling leg to allow room for the bracket to fit. Use a level check your adjustments.
Page 6
If range does not If you need service: Moving the range operate: Maintain the quality built into your range by calling an authorized service Check that the circuit breaker is not company. tripped or the house fuse blown. To obtain the name and number of the Check that the power supply cord is authorized...