Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to wall behind range.
Reconnect the anti-tip bracket,
if the range is moved.
Failure to follow
these instructions can result
in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed
•
Tape measure
•
#2 Phillips screwdriver
•
1/8"x 41¼ '' flat-blade
screwdriver
•
Level
•
Drill
•
Wrench or pliers
•
Pipe wrench
•
Adjustable wrench or
8/8"wrench
•
3/8"drive ratchet
•
1/8"drill bit
•
18/16" c ombination
wrench
•
1/4",3/8", 8/16"nut drivers
•
3/16"carbide tip masonry bit
•
Marker or pencil
•
Pipe-joint compound
resistant to LP gas
•
Noncorrosive leak-detection
solution
•
Tubing cutter
For LP/Natural
Gas
Conversions
•
T15 Torx ®tscrewdriver
•
7/8"socket
•
Adjustable wrench
•
1/2"deep-well socket
•
7 mm nut driver
•
Masking tape
Parts supplied
Check that all parts are included.
•
Anti-tip bracket kit
•
Burner heads and caps
•
Griddle drip tray (on griddle models)
•
LP orifice package (W10323791)
•
Conversion label (8114P522-60)
NOTE: The cooktop is manufactured
for use with Natural gas.
To convert to LP gas, see the "Gas Conversions"
section.
Parts needed
All models must be installed with a backguard
if installing at zero
clearance to a combustible
backwall. See "Cabinet Dimensions"
in the "Location Requirements"
section for installation
requirements.
•
30" (76.2 cm) Adjustable Backguard
Order Part Number 8285148
•
36" (91.4 cm) Adjustable Backguard
Order Part Number 8284756
•
48" (121.9 cm) Adjustable Backguard
Order Part Number 8284755
•
22" (55.9 cm) Backguard with Shelf for 30" (76.2 cm)
Ranges
Order Part Number W10225950
•
22" (55.9 cm) Backguard with Shelf for 36" (91.4 cm)
Ranges
Order Part Number W10225949
•
22" (55.9 cm) Backguard with Shelf for 48" (121.9 cm)
Ranges
Order Part Number W10225948
A. Anti-tip bracket
B. #8-18 x 111 Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to
subfloor. Thickness of flooring may require longer screws to
anchor bracket to subfloor. Longer screws are available from
your local hardware store. See "Install Anti-Tip Bracket"
section.
•
Burner grates
Gas pressure regulator
To order, see the "Assistance
or Service" section of the Use
and Care Guide.
Check local codes and consult gas supplier. Check existing gas
supply and electrical supply. See "Electrical Requirements"
and
"Gas Supply Requirements"
sections.
It is recommended
that all electrical connections
be made by a
licensed, qualified electrical installer.
High Altitude Conversion
To convert the range for elevations above 6,560 ft (1999.5 m),
order a High Altitude Conversion
Kit.
•
Part Number W10324363 - LP high altitude
•
Part Number W10324365 - Natural gas high altitude
To order, see the "Assistance
or Service" section of the Use and
Care Guide.
I"®TORX is a registered trademark
of Acument
Intellectual
Properties, LLC.