Jenn-Air JGS8850CDB01 Installation Instructions Manual page 16

7. Swing the oven bake burner to the side and lift it off the oven 11. Flip the regulator cap over and replace the plastic cover.
orifice and set aside.
8.
/
/
A. Oven bake burner screws
B. Oven orifice
Locate the access panel at the rear of the storage drawer
compartment. Using a 1¼,, ( 6 mm) nut driver, unscrew the
2 access panel screws. Remove access panel and set aside
along with the 2 screws.
A
A
B
A. LP gas position
B. Natural gas position
C. Plastic cover
12. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burner
1.
Locate the oven orifice hood from the front of the range.
9.
A. Access panel screws
Locate gas pressure regulator at the rear of the storage
drawer compartment.
IMPORTANT: Do not remove the gas pressure regulator.
10. Unscrew the regulator cap and remove the plastic cover.
2.
Using an adjustable wrench, turn the Number .0512 LP gas
oven bake burner orifice hood counterclockwise to remove.
..................................... :._ _:_,
A. Number .0512 LP gas oven bake burner orifice hood
A. Plastic cover
B. Regulator cap
16