Floor Mounting
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti=tip bracket to rear range foot.
Reconnect the anti=tip bracket, if the range is moved.
Failure to follow these instructions can result in death
or serious burns to children and adults.
Wall Mounting
I
A
A. #12 x 1%" screws
B. Anti-tip bracket
1=
2.
Determine which mounting method to use: floor or wall.
If you have a stone or masonry floor you can use the wall
mounting method. Determine and mark the centerline of the
cutout space. The mounting bracket must be installed on the
right side of the cutout. Position mounting bracket in cutout
as shown in the following illustration.
Measurement
B"
30" (76.2 cm) ranges: 11%" (29.5 cm)
36" (91.4 cm) ranges: 14%" (37.1 cm)
48" (121.9 cm) ranges: 205/8 '' (52.4 cm)
Measurement
C"
Optional distance from backwall. If backwall is constructed
of a combustible
material and a backguard
is not installed,
a 6" (15.2 cm) minimum clearance is required for all models.
Install anti-tip bracket accordingly.
C
A. Centerline
B. Centerline of cutout to centerline
of anti-tip bracket
C. Backwafl to back of range
Drill two 1/8"(3.0 mm) holes that correspond to the bracket
holes of the determined mounting method. See the following.
I
A. #12 x 1%" screws
B. Anti-tip bracket
3. Using the Phillips screwdriver, mount anti-tip bracket to the
wall or floor with the two #12 x 1%" screws provided.
Depending on the thickness of your flooring, longer screws
may be necessary to anchor the bracket to the subfloor.
Longer screws are available from your local hardware store.
4. Move range close enough to opening to allow for electrical
connections
to be made. Remove shipping base, cardboard
or hardboard from under range.
5. Continue installing your range using the following installation
instructions.
11