Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
DIGITAL VIDEO RECORDER
GB
Rear View
!
@
# $
%
^
Caution
Caution
If suffocated, the air inlet or outlet may harm the product performance. Please
install the product where you can secure free ventilation. Never allow goods
around the air inlet or outlet if they are big enough to suffocate it.
If you want to run DVRs on cabinets or Reck, be sure to secure air ventilation.
No
Name
It is the composite image signal input port(BNC Style
Image Input Port
1
Connector).
THROUGH
You can use THROUGH Terminal to send VCR signal to
2
Terminal
another VCR.
3
Image Output Port
It is a composite image signal input port (BNC Style Connector).
S-VHS PORT
It is the S-VHS image signal in/out port.
4
Voice In/Out Port
It is a voice signal in/out port(RCA Jack).
5
6
RS-232 Port
It is a serial port for remote control.
1-5
&
* (
Function
No
Name
Function
The system gives an alarm when the High(5V) signal incomes
External In/Out
7
for more than 0.5 seconds in the N.C.(Normally Closed) mode
Port
and when the Low(0V) signal incomes for more than 0.5 sec
onds in the N.O.(Normally Open) mode.
GND
ALARM OUT: The High(5V) signal comes out during alarm
recording.
ALARM RESET IN : The system cancels the alarm when the
Low(0V) signal incomes for more than 0.5 seconds.
1 SHOOT REC IN
REC START IN: The system starts recording when the
Low(0V) signal incomes for more than 0.5 seconds.
REC END: The Low(0V) signal comes out for about 1 second
when you set the DISK END MODE in the RECORD MODE
SETUP menu to SETUP and the HDD consumes all of its free
space.
TRIGGER OUT: This signal converts the Multiplexer record
ing output screen.
FACTORY RESET
8
Initializes the system.
Supports the DC power socket.
POWER
9
You can plug in the 100-250 VAC power cord.
GB
1-6
Advertisement
Table of Contents
