Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
2
GB
Date and Time Search
Press the LEFT or RIGHT button (
you reach the year/month/day/hour/minute/second for
search and press the UP or DOWN button (
until you reach the year/month/day/hour/minute/second
for setup.
Press the ENTER button (
) to move to the part
for searching and still the image.
Press the PB/STILL button (
) to play the part
for searching as a light blinks.
Press the STOP button (
) to stop playing.
The following screen appears when you press the
PB/STILL button (
).
The date and time at the bottom of the screen displays
when the current data in play was recorded.
If there is no recorded DATA following your designated
date and time searching,
message is
appeared on the blue colored screen as below
5-3
DATE/TIME SEARCH
/
) until
RECORD FROM
2003-01-01 09:22:31
TO
2003-01-30 15:33:23
/
)
GO TO
2003-01-14 13:42:26
2003-01-01
00:00:01
2003-01-01
00:00:01
NO DATA
3
Alarm Record Retrieval
Among the data recorded in HDD, the list of
recorded data generated by alarm is displayed based
on recording start time.
Note
Note
If the list of the recorded data cannot be shown in a screen, you can use the LEFT
(
) or RIGHT(
) button to view the list in pages. Press the LEFT(
to move to the previous page, or press the RIGHT(
page.
GB
ALARM EVENT SEARCH
EVENT NO. 3/3
2001-05-11 09:23:55
AI
2001-05-14 15:22:13
AI
2001-05-14 15:30:00
AI
) button
) button to move to the next
5-4
Advertisement
Table of Contents
