Table of Contents
Advertisement
DIGITAL VIDEO RECORDER
DIGITAL VIDEO RECORDER
8
GB
System Setup
The following illustrates the intial setting of the
Setting password of system. You can input a
password from 4 characters to 8 characters, initial
setting value is Left(
), Right(
and Down(
) of direction key.
Caution
Caution
In case you forget your password, please reset the factory and the password will return
to the initial default value.
Please refer to Page 3-2, FACTORY RESET for the detailed factory resetting method.
If you set this to
, you can ask for a password, which is set in the
time the MENU button is pressed or the recording lock cancellation is attempted during the
recording, and stop the respective operation if wrong password is entered. If set to
do not have to enter password for each case metioned above.
If you set this to ON and terminate the menu, the
system will delete all the data of the HDD.
Then, if you press the MENU key to return to the
MENU, the system will confirm again as follows. If
you set this to YES and input the password, all data
will be deleted.
3-17
menu.
CLOCK/DISPLAY MODE SETUP
PASSWORD
********
PASSWORD LOCK
OFF
CLEAR ALL DATA
OFF
), Up(
)
DEFAULT SETUP
OFF
VIDEO INPUT PORT
Composite
VIDEO SOURCE
MULTIPLEXER
VIDEO LOSS BUZZER
ON
œ❷
:MOVE
:SELECT MENU:EXIT
, each
, you
CLEAR ALL DATA
This operation will clear all
recorde data. System must restart
to complete this operation
Continue?
YES
NO
Caution
Caution
Once deleted, the data can not be retrieved for ever. Please check again before you
press the CLEAR ALL DATA.
If you set this to
and terminate the menu, all
the setting data will return to the original ones
that the system had just out of the factory.
Despite, the HDD data will be left intact.
Then, if you press the MENU key to return to the
MENU, the system will confirm again as follows.
If you set this to
and input the password, all
the setting value will be deleted.
Input supports Composite video input having BNC terminal.
Also, it is possible to select S-VHS input.
It supports coupling with MULTIPLEXER.
In case of 1 channel, it can be selected and used to CAMERA.
You can turn the BUZZER ON or OFF when encountering Video input signal LOSS.
GB
LOAD DEFAULT SETUP
Do you want to reload default
settings
YES
NO
3-18
Advertisement
Table of Contents
