Weslo Pursuit R 2.2 Bike User Manual page 8

4. Have a second person hold the Handlebar (42)
near the Upright (13). Insert the Pulse Wires (A)
into the Upright and pull them out of the top of
the Upright.
Avoid pinching the wires. Attach the Handlebar
(42) to the Upright (13) with two M8 x 65mm
Bolts (49) and two M8 Locknuts (10).
Attach the Water Bottle Holder (3) to the Upright
(13) with two M4 x 15mm Screws (48).
5. The Console (16) can use four AA batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the battery cover from the back of the
Console (16), and insert batteries into the battery
compartment. Make sure to orient the bat-
teries as shown by the diagram inside the
battery compartment. Then, reattach the bat-
tery cover.
4
13
10
5
16
8
Avoid pinching
the wires
A
42
49
3
48
Battery
Cover