Weslo Pursuit R 2.2 Bike User Manual page 10

8. Loosen and remove the Seat Post Knob (9) from
the Frame (1).
Next, insert the Seat Post (5) into the Frame
(1). Adjust the Seat Post to the desired height,
and insert the Seat Post Knob (9) through the
indicated hole in the Frame into one of the
adjustment holes in the Seat Post.
Tighten the Seat Post Knob (9). Make sure that
the Seat Post Knob is inserted into one of the
adjustment holes in the Seat Post (5).
9. Identify the Left Pedal (24).
Using an adjustable wrench, firmly tighten the
Left Pedal (24) counterclockwise into the left
arm of the Crank (21).
Tighten the Right Pedal (not shown) clockwise
into the right arm of the Crank (not shown).
Adjust the strap on the Left Pedal (24) to the
desired position, and press the end of the strap
onto the tab on the side of the Left Pedal. Adjust
the strap on the Right Pedal (not shown) in
the same way.
10. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Note: Extra parts may be included. Place a mat beneath the exercise bike to protect the floor.
8
9
Strap
24
Tab
10
5 Adjustment
Holes
1
Hole
9
21