Weslo Pursuit R 2.2 Bike User Manual page 12

CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The console offers a selection of features designed to
make your workouts more effective.
When you use the manual mode of the console, the
console will provide continuous exercise feedback. You
can even measure your heart rate using the handgrip
heart rate monitor.
The console also offers six quick pace workouts that
prompt you to vary your pedaling speed while guiding
you through an effective workout.
Before using the console, make sure that batteries are
installed (see assembly step 5 on page 8). If there
is a sheet of plastic on the display, remove the plastic.
To use the manual mode, see the instructions at the
Washo
right. To use a quick pace workout, see page 14.
EBWL31512
WLEX81312.0
HOW TO USE THE MANUAL MODE
1. Turn on the console.
To turn on the console, press the On/Reset button
or begin pedaling. The entire display will turn on for
a moment; the console will then be ready for use.
2. Select the manual mode.
When you turn
on the console,
the manual
mode will be
selected. If you
have selected a
workout, reselect
the manual mode
by pressing any of the Quick Pace Workout Apps
buttons repeatedly until zeros appear in the display.
3. Follow your progress with the display.
The console has several displays that show the
following workout information:
Speed—This display shows your pedaling speed in
revolutions per minute (rpm).
Time—This display shows the elapsed time.
Note: When a workout is selected, the display
shows the time remaining in the workout instead of
the elapsed time.
Distance—This display shows the distance you
have pedaled in total revolutions.
Calories—This display shows the approximate
number of calories you have burned.
Pulse—This display shows your heart rate when
you use the handgrip heart rate monitor.
Scan—When you select this display option, the
upper section of the display will show both time and
distance information, and the lower left section of
the display will show calories information.
12