Table of Contents
Advertisement
www.weslo.com
Model No. WLEX81312.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Decal
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Weslo Pursuit R 2.2 Bike
Summary of Contents for Weslo Pursuit R 2.2 Bike
- Page 1 USER’S MANUAL Model No. WLEX81312.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 4: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new WESLO PURSUIT R reading this manual, please see the front cover of this ® 2.2 exercise bike. Cycling is an effective exercise for manual. To help us assist you, note the product model increasing cardiovascular fitness, building endurance, number and serial number before contacting us. -
Page 5: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 6: Assembly
ASSEMBLY • To hire an authorized service technician to • In addition to the included tool(s), assembly assemble this product, call 1-800-445-2480. requires the following tools: one Phillips screwdriver • Assembly requires two persons. one adjustable wrench • Place all parts in a cleared area and remove the packing materials. - Page 7 2. Remove the screw (not shown) and the card- board tube (not shown) from the Frame (1) if necessary. Discard the screw and the cardboard tube. Orient the Front Stabilizer (2) so that the large holes face the Frame (1). Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 70mm Screws (33).
- Page 8 4. Have a second person hold the Handlebar (42) near the Upright (13). Insert the Pulse Wires (A) into the Upright and pull them out of the top of Avoid pinching the Upright. the wires Avoid pinching the wires. Attach the Handlebar (42) to the Upright (13) with two M8 x 65mm Bolts (49) and two M8 Locknuts (10).
- Page 9 6. While a second person holds the Console (16) near the Upright (13), connect the wires on the Console to the Extension Wire (23), to the Pulse Wires (A), and to the Ground Wire (46). Insert the excess wire into the Upright (13) or into the Console (16).
- Page 10 8. Loosen and remove the Seat Post Knob (9) from the Frame (1). Next, insert the Seat Post (5) into the Frame (1). Adjust the Seat Post to the desired height, and insert the Seat Post Knob (9) through the indicated hole in the Frame into one of the adjustment holes in the Seat Post.
-
Page 11: How To Use The Exercise Bike
HOW TO USE THE EXERCISE BIKE HOW TO ADJUST THE SEAT POST HOW TO ADJUST THE PEDALING RESISTANCE For effective exercise, the seat should be at the proper To increase the height. As you pedal, there should be a slight bend in resistance of your knees when the pedals are in the lowest position. - Page 12 CONSOLE DIAGRAM HOW TO USE THE MANUAL MODE 1. Turn on the console. To turn on the console, press the On/Reset button or begin pedaling. The entire display will turn on for a moment; the console will then be ready for use. 2.
- Page 13 4. Measure your heart rate if desired. When you turn on the console, Indicator the scan display Note: If there are sheets of plastic on will be selected Contacts the metal contacts automatically. An indicator will of the handgrip appear below heart rate monitor, remove the plastic.
- Page 14 HOW TO USE A QUICK PACE WORKOUT If your pedaling speed is slower than the cur- rent target speed, an arrow will appear next to the 1. Turn on the console. RPM meter to prompt you to increase your speed; if your pedaling speed is faster than the target speed, an arrow will prompt you to decrease your To turn on the console, press the On/Reset button...
-
Page 15: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regu- Next, turn the resistance knob to the lowest setting. larly. Replace any worn parts immediately. Locate the Reed Switch (39). Turn the Crank (21) until a Magnet (38) is aligned with the Reed Switch. Loosen, To clean the exercise bike, use a damp cloth and a but do not remove, the #8 x 16mm Screw (41). -
Page 16: Fcc Information
HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is at the highest level, the drive belt may need to be adjusted. To adjust the drive belt, the pedals and the shields must be removed. Use an adjustable wrench to remove the pedals. -
Page 17: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 18: Part List
PART LIST Model No. WLEX81312.0 R0912A Key No. Qty. Description Key No. Qty. Description Frame U-bracket Front Stabilizer Lower Resistance Cable Water Bottle Holder M8 x 60mm Screw Front Stabilizer Cap Eyebolt Seat Post M6 Locknut Rear Stabilizer M10 x 70mm Screw Handlebar Cap M8 x 15mm Screw Leveling Cap... -
Page 19: Exploded Drawing
EXPLODED DRAWING Model No. WLEX81312.0 R0912A... -
Page 20: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • t he key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) LIMITED WARRANTY IMPORTANT: You must register this product within 30 days of the purchase date to avoid added fees for service needed under warranty.