Table of Contents
Advertisement
window.
2.
Check the box to enable the window.
3.
Use the mouse to resize or move the motion detection window.
Adjust the "Sensitivity" level. Lower sensitivity levels will result in more activity
4.
needed to trigger an event.
Adjust the "Threshold" to change the threshold level. The higher the threshold, the
5.
larger objects need to be to trigger an event.
6.
The chart below the Live View window indicates the activity level of the Motion
Detection window. When motion is detected by the camera and exceeds the defined
threshold, a red bar will appear. Users can use this feature as a trigger source to
send photos or videos to a remote server via email or FTP.
Click Apply to apply settings or Cancel to cancel changes.
Digital Input (DI)
The DI socket allows the IP camera to receive input from an external device.
The external device should have the ability to drive voltage on the connected DI wire to the
triggering voltage level in order to notify the IP camera of any event of interest. The IP
camera will then process the event notification according to the specific event rules.
Triggering voltage Level: LOW, HIGH, Rising and Falling
Users should select the option according to the capability of their external device.
- 44 -
Advertisement
Table of Contents
