10.
Remove the system board (see
11.
Remove the heat sink (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2.
Lift the processor (2) straight up, and remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
82
Chapter 4 Removal and replacement procedures
System board on page
Fan and heat sink on page
The gold triangle on the processor (3) must be aligned with the triangle icon embossed
71).
76).
ENWW