Optical Drive Cable - HP Pavilion g7 Maintenance And Service Manual

c.
Remove the wireless antenna cables and transceivers.
Reverse this procedure to reassemble and install the display assembly.

Optical drive cable

Description
Optical drive cable (includes optical drive connector)
Before removing the optical drive cable, follow these steps:
1. Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
6. Remove the optical drive (see
7.
Remove the hard drive (see
8.
Remove the keyboard (see
9. Remove the top cover (see
Remove the optical drive cable:
1. Disconnect the optical drive cable (1) from the system board.
2. Release the optical drive cable (2) from the clips built into the base enclosure.
ENWW
Battery on page 36).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 48).
Top cover on page 51).
37).
38).
41).
Component replacement procedures
Spare part number
682742-001
67