Service Door - HP Pavilion g7 Maintenance And Service Manual

Service door

Description
Plastics Kit (contains the service door)
Before removing the service door, follow these steps:
1. Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the service door:
1. Using a small Phillips screwdriver, loosen the service door screw (1).
2. Slide the service door (2) forward slightly and lift the front right corner (3) to tilt the service door.
3. Remove the service door (4) at an angle.
Reverse this procedure to replace the service door.
ENWW
Battery on page 36).
Component replacement procedures
Spare part number
682754-001
37