HP Pavilion g7 Maintenance And Service Manual page 69

2. Release the wireless antenna cables (2) from the clips and the opening in the base enclosure.
NOTE:
cables.
CAUTION:
support the display assembly can result in damage to the display and other computer components.
3. Remove the four Phillips M2.5 × 6.5 screws (1) that secure the display assembly to the computer.
4. Remove the display assembly by lifting straight up (2).
ENWW
It may be necessary to release the USB board ZIF cable to remove the wireless antenna
Support the display assembly when removing the following screws. Failure to
Component replacement procedures
61