Ups Status Parameters - Liebert 7200 Series User Manual

Chapter 5 - Mantenance

UPS status parameters

5.4 UPS status parameters
The value of the status parameters are displayed on the LCD screen by selecting options from the
windows reached via the measurement option on the main screen ( see figure 5-1 menu map ). Under
normal circumstances the default window will be displayed:-
NORMAL OPERATION
11.16.10
> MEASUREMENT
FUNCTION
MAINTENANCE
SETUP
OUTPUT
INPUT
BATTERY
> TEMPERATURE
TEMPERATURE
Tt + 27,4
Ta + 22,6
Page 5-4
Issue 6
(03/98)
document in response to "powersure ups"
From the default window press ENTER to display the
main access screen:
01.05.97
The cursor will be aligned with the MEASUREMENT
<
option, once again press ENTER.
Note: The
MAINTENANCE and SETUP are only accessible with
a password, but for general maintenance procedures
these options are not required.
With reference to figure 5-1 and by using the DOWN
and ENTER
the operator control and display panel can be viewed.
<
For example to view the system temperatures use the
DOWN
TEMPERATURE; now press the ENTER key.
[C]
The TEMPERATURE screen is displayed where:-
To +25,4
Tt
Tb +20,7
To
Ta
Tb
menu options
keys all the parameters monitored from
key until the cursors
is transformer temperature
is UPS cabinet outgoing temperature;
is ambient temperature;
s battery cabinet temperature.
7200 Series UPS User Manual
Single Module and 1+1 Parallel System
FUNCTION,
are opposite