Liebert 7200 Series User Manual page 3

This manual contains information concerning the installation, operation and maintenance of the
Liebert Series 7200 Uninterruptible Power System (UPS) for Single Module and 1+1 Installations.
All relevant parts of the manual should be read prior to commencing installation.
The UPS must be commissioned by an engineer approved by the manufacturer (or his agent)
before being put into to service. Failure to observe this condition will invalidate any implied
warranty.
The Series 7200 UPS has been designed for Commercial/Industrial use only.
The Series 7200 UPS has not been designed for use in any life support applications.
If you encounter any problems with the procedures contained in this manual you should seek
immediate assistance from the Liebert Sales Office from whom the equipment was purchased.
Alternatively, contact the Liebert's Customer Service & Support department at the address shown
below:
Liebert Europe
Customer Service and Support Department,
Globe Park, Marlow, SL7 1YG, U.K.
Telephone +44 (0) 1628 403200
Fax +44 (0) 1628 403203
Liebert Corporation pursues a policy of continual product development and reserves the right
to change the equipment design without notice.
© Copyright 1998 by Liebert Corporation.
Unauthorised reproduction prohibited
All rights reserved.
Page i