Quick Installation - Tripp Lite SMART500RT1U Owner's Manual

Quick Installation

Plug the UPS into an outlet on a
1
dedicated circuit.*
NOTE! after you plug the UPS into a live AC out-
let, the UPS will automatically charge its batter-
ies,** but will not supply power to its outlets until
it is turned ON (see Step 3 below).
* See Specifications for circuit amperage requirements. Select models
include an additional plug which can be switched by a qualified elec-
trician. See Specifications for details. ** The BATTERY CHARGE
LED will be the only LED illuminated.
Plug your equipment into the UPS.*
2
* Your UPS is designed to support only computer equipment. You will
overload the UPS if the total VA ratings for all the equipment you con-
nect exceeds the UPS's Output Capacity (see Specifications). To find
your equipment's VA ratings, look on their nameplates. If the equip-
ment is listed in amps, multiply the number of amps by 120 to deter-
mine VA. (Example: 1 amp × 120 = 120 VA). If you are unsure if you have
overloaded the UPS's outlets, see "OUTPUT LOAD LEVEL" LED
description.
3 Turn the UPS ON.
Press and hold the "POWER" button for one second.
The alarm will beep once briefly after one second has
passed. Release the button.
1
SMART2200RMXL2U plug
(NEMA 5-20P) shown
2
SMART3000RM2U shown
3
5