Fostex FM-4 Owner's Manual page 16

10 [SOURCE SEL] switch
Selects the source signal of the [MAIN OUT] and
[SUB OUT] connectors . You can select the mas-
ter stereo signal or the post-fader signals of input
channels 1 through 4 .
Switch MAIN OUT
position (L/1, R/2)
Stereo buss
MIX
(L, R)
DIRECT Inputs (1, 2)
<Note>: When you select the DIRECT position,
you cannot apply the limiter to the output signals
of the [MAIN OUT] connectors .
11 . [TAPE OUT] jack
This jack outputs the unbalanced stereo buss sig-
nal . The reference level is fixed to -10 dBV .
Connector: 3 .5 mm stereo mini-phone jack
12 . [RTN] jack
This jack accepts a -10 dBV stereo signal .
Connector: 3 .5 mm stereo mini-phone jack
13 . [PHONES] jack
You can connect stereo headphones with the 3 .5 mm
plug for monitoring .
You can monitor the same signal as the [PHONES]
jack in the front panel simultaneously .
Connector: 3 . 5 mm stereo mini-phone jack
SUB OUT
Notes
(L/3, R/4)
Stereo buss The stereo buss
(L, R) signal is output .
The post-fader
s i g n a l s o f t h e
Inputs (3, 4)
input channels
are output .
1