Automatic Functions Timer ½; Programming Switching Times Switching Times 1/2 - Grundig YB500 Owner's Manual

For the function "wake-up by the radio programme", you can enter
two independent switch-on and switch-off times. Each switch-on
time can be assigned to a different radio station.
For example, you can let your radio switch on to your favorite
station by the switch-on time 1.
If you wish then to hear a programme (e.g., the latest news)
broadcasted by a different station after switching on by switch-
on time 1, select this programme with switch-on time 2 and switch-off
time 2.
When the switch-on time 2 then is reached, you will hear the
desired station until the radio is turned off by the switchoff time 2.
Then the radio continues playing your favorite programme until
the switch-off time 1 is reached.
Please note ...
if both switching times are programmed and overlap each other:
- Switch-on times have always priority over switch-off times.
- The second switching times have priority over the first switching
times.
Already programmed stations are not affected by time pro-
gramming.
The switching times always refer to the times indicated in the
display (TIME I or TIME II).
An example for better understanding:
You have programmed the local time (e.g., CET or CEST) as TIME I.
TIME II stands for a second time zone (e.g., Greenwich Mean
Time/GMT).
You have entered 14.00 hours as switch-on time and set the radio to
"AUTO".
If then the display indicates TIME I, the radio will be switched on at
14.00 hours local time;
if the display indicates TIME II, the unit will be switched on at
14.00 hours of the second time zone.
Programming Switching Times
Switching Times 1/2
•
Switch the radio on.
•
Select the menu item ON 1 (switch-on time 1).
•
Use the numeric buttons 0 ... 9 to set the desired switchon time and
confirm the entry with the TIME I/II button. The switch-off time is
automatically set so that one hour playing time is obtained.
•
Enter the number of the desired station memory location with the
numeric buttons then press the MEMORY button.
•
Repeatedly press the MODE button to select the desired wake-up
(alarm) mode:
N) n= wake-up by radio programme. You
hear the selected station.
U4= wake-up (alarm) by alarm signal. The radio station
Automatic Functions
•
Repeatedly press the MODE button to select the desired wake-up
(alarm) mode:
•
Use the TUNE A button to select the menu function OFF 1 (switch-
off time 1).
25
Timer ½
= wake-up by radio programme. You
hear the selected station.
= wake-up (alarm) by alarm signal. The radio station is
muted and an alarm signal sounds instead.
and = wake-up by alarm signal and radio
programme. You hear the radio programme
and the alarm sound signal.